Deprecated: Function set_magic_quotes_runtime() is deprecated in /home2/sch657/domains/ on line 106 • View topic - Engine mount dimensions

Engine mount dimensions

Service and maintenance tips, questions, and issues.

Moderator: Ron Spiker

Engine mount dimensions

Postby Ken_Shea » Tue Jan 01, 2013 8:41 pm

Any one have the dimensions for the engine mount hole locations?
When I rebuilt this engine I made a stand, after tripping over it for years finally just tossed it saying to my self, won't be needing that again.
Well... of course it did not turn out that way and need to replace at least one push rod tube o-ring and get everything checked and up to par. Where I am at now with it it's simpler to pull the engine. Would like to have a stand ready when it's pulled.

Thought it would be in the overhaul and/or parts manuals but did not see it.

If any one has it my bet is on Bryan since he likes to draw :D

Posts: 24
Joined: Fri Nov 02, 2012 10:13 am

Re: Engine mount dimensions

Postby 9121u » Tue Jan 01, 2013 9:24 pm

HI KEN the easy way is to find a old lycoming engine mount off a old air plane turn it up side down and modify the legs to high to your needs.brantly has same bolt pattern..
Posts: 255
Joined: Sat Mar 29, 2003 6:20 pm

Re: Engine mount dimensions

Postby bryancobb » Wed Jan 02, 2013 1:21 pm


I just sat mine on 2 sawhorses and tied a rope to the roof so it wouldn't tip over.

And NO...I DID NOT lift the engine with that string! LOL

YHO-3BR Pilots International
User avatar
Posts: 285
Joined: Thu Feb 27, 2003 8:23 pm
Location: Cartersville, Georgia

Re: Engine mount dimensions

Postby Ken_Shea » Wed Jan 02, 2013 2:34 pm

Not sure where I'd find an engine mount around here, but that would be ideal.

That would be very quick and right now quick with no hassle may be a very good option.

Thanks guys

Posts: 24
Joined: Fri Nov 02, 2012 10:13 am

Return to Servcing and Maintaining

Who is online

Users browsing this forum: No registered users and 1 guest