Tow Bar

Add-ons, tools, or useful accessories for the Brantly.

Moderator: Ron Spiker

Tow Bar

Postby Steve Chenoweth » Thu Feb 20, 2003 3:56 pm

Finding that ground handling is a bit difficult as a one man job, especially over an uneven surface, I ordered a helicopter tow bar that has worked out well. It is from Brackett Aircraft and can be found at the following link:

http://www.brackettaircraft.com

It is designed for a Schweizer, which has wider skids, but works great on my B-2B. All I had to do was cut out a little of the center cross bar to allow for the narrower width. I ordered mine with the trailer connector so I can hook it up directly to my van, no need for a tug.

Steve Chenoweth
Last edited by Steve Chenoweth on Fri Apr 29, 2005 2:01 pm, edited 1 time in total.
User avatar
Steve Chenoweth
Site Admin
 
Posts: 187
Joined: Thu Jan 30, 2003 11:04 pm
Location: Dallas, TX

Postby Kevin Hynes » Mon Mar 10, 2003 9:40 am

Have seen and used Steve's tow bar, mates to front of skids, providing another set of wheels for the front end, and also hooks to trailer hitch for towing. If you leave it unhitched, it still provides an easier method of moving around, by eliminating need to have to push down on tail while also trying to push forward. Minor mods would make it even more user freindly. Any body else out there got any great ideas or already used methods?
Kevin Hynes
 
Posts: 8
Joined: Mon Feb 24, 2003 1:18 pm

Postby Kevin Hynes » Mon Mar 10, 2003 9:43 am

Have seen and used Steve's tow bar, mates to front of skids, providing another set of wheels for the front end, and also hooks to trailer hitch for towing. If you leave it unhitched, it still provides an easier method of moving around, by eliminating need to have to push down on tail while also trying to push forward. NOTE: Be careful if pulling backwards, while attachments are very strong, if you look at the geometry carefully, it is made to take the load of forward movement better than rearward movement. All in all, a good product adapted to the Brantly, and with minor mods would make it even more user freindly. Any body else out there got any great ideas or already used methods?
Kevin Hynes
 
Posts: 8
Joined: Mon Feb 24, 2003 1:18 pm

Postby N2285U » Thu Mar 27, 2003 8:56 am

I built a 10'x10' landing pad out of 2x4's 3/4" plywood and steel channel. I used an old truck trailer hitch and 4 castering/4 straight wheels from tractor supply. It works great an there is no hooking up the helicopter skids to anything or having to mess with the ground wheels. It also keeps the helicopter up off the ground which decreases the chances of hitting the rotor blades on cars, heads, etc.
If your wings aren't turning, they are broken and you had better get them fixed....
N2285U
 
Posts: 80
Joined: Wed Mar 26, 2003 10:34 pm
Location: Auburn, IN

Got any pictures or instructions for the landing pad

Postby Captain Cosmic » Mon Apr 14, 2003 12:54 am

I would like to see what your landing pad looks like. Have you got a website where you have the pictures posted? Did you actually have a plan to work off of, or was it all just guess, measure and cut? :shock:
Captain Cosmic
 
Posts: 9
Joined: Fri Apr 11, 2003 7:38 am
Location: Sweden

Postby N2285U » Mon Apr 14, 2003 7:46 pm

If you give me your email I would be happy to send you a picture.
If your wings aren't turning, they are broken and you had better get them fixed....
N2285U
 
Posts: 80
Joined: Wed Mar 26, 2003 10:34 pm
Location: Auburn, IN

Postby fred » Sun Nov 27, 2005 11:15 am

i am new to the brantly business, having just bought one and starting the learning process. i did run across a towbar, hoever, on a rotorway. small unit which picks up the front end of the skids on wheels. much like the one mentioned by steve. i called the fellow who builds them and the good news is that it costs under 400.00. will talk more about when i see how it works.
fred
 
Posts: 9
Joined: Mon Feb 28, 2005 8:41 pm


Return to Accessories

Who is online

Users browsing this forum: No registered users and 2 guests

cron