Training

Commerical use and experiences.

Moderator: Ron Spiker

Training

Postby Ron Spiker » Mon Nov 21, 2011 9:07 pm

I had the opportunity to work with a pilot this past weekend who has a Brantly, but hasn't gotten to fly it yet. He has time in several helicopter models, including some in a Brantly, but he wanted to focus on advanced maneuvers and emergency procedures. And that we did, for more than 4 hours.

I started him off easy, with some normal takeoffs and approaches, then maximum performance takeoffs, steep approaches, running takeoffs and landings, no-hover takeoffs and landings, some ground maneuvers, air taxi, quick stops... just getting warmed up. We worked a while on engine failures and tail rotor failures at hover, and hover taxi engine failure. Some of these expected were and several by surprise.

Then autos from altitude. We must have spent 2.5 hours on these. Straight-in, 90°, 180°, 360°, to the left, to the right, adjust for too short or too long. After the first few with power recovery, then almost all the remaining were full touchdown. He was doing so well I started chopping the throttle during takeoff, during steep approaches, anywhere in the pattern, while hovering or hover taxi, and surprise tail rotor failures. Anywhere where I knew it was safe to get into an auto. Most of these were to the ground also.

An intense workout, but enjoyable. Congrats to the pilot. Great job done.
User avatar
Ron Spiker
Site Admin
 
Posts: 527
Joined: Sat Mar 22, 2003 5:33 pm
Location: Pittsburgh, PA

Re: Training

Postby 9121u » Tue Nov 22, 2011 7:15 pm

GREAT JOB i bet he loved that training ..this type of training every one should go threw ..even just to freshen up on things ..I no i need to get some more of you..glad to here there's still interest in brantlys there going to be around a log time..I think BEST flying helicopter out there.........tom
9121u
 
Posts: 254
Joined: Sat Mar 29, 2003 6:20 pm


Return to Brantlys at Work

Who is online

Users browsing this forum: No registered users and 1 guest

cron