Crash Question

Questions and tips for safe and fun flight.

Moderator: Ron Spiker

Crash Question

Postby J-nut » Wed Jul 22, 2009 6:58 pm

Was talking with a friend recently about the crash down in Camas, WA. I guess he knows a friend of one of the guys involved. He was saying one of the guys got whacked by one of the blades coming down into the cabin. Not severely I gather but enough to give him a concussion. I know of one other where one of the occupants had the top of his headset hit and got a cut on his head from either the headset being knocked off or being knocked into the door frame. I'm curious if anyone knows of any other accidents where the blades have come down into the cabin and injured or killed the occupants?

Compared to the Eurocopter's transmissions breaking loose and decapitating the front seat passengers and the Robinson's blade intrusions into the cabin after tailboom strikes I figure the Brantly is pretty safe if all it can manage to do is give you a whack on the head. Just curious and all... :mrgreen:
Semper ubi sub ubi
J-nut
 
Posts: 79
Joined: Sat Jan 31, 2004 5:23 pm
Location: Seattle, WA

Re: Crash Question

Postby 9121u » Wed Jul 22, 2009 8:08 pm

HI i have read every ntsb reports and found there were 2 that got hit by blades. 2 seperate incidents. but each of them stood up outside into turning rotors.each was killed. but you have good point brantlys are the safest you can own. have a good day. and be safe.
9121u
 
Posts: 254
Joined: Sat Mar 29, 2003 6:20 pm

Re: Crash Question

Postby G-ATLO » Wed Jan 18, 2012 2:54 am

Instructer killed in a Brantly in Oxford England in the 70s called Graham Merrick(he was one of my Dads instrutors) bolt failed on mid blade attachment ,blade came in to cabin in the hover killing instructor ,student walked away.Scarily the same student was driving his Ferrari shortly after,and crashed killing his mother and he also walked away from it.
User avatar
G-ATLO
 
Posts: 37
Joined: Fri Jun 27, 2003 2:49 pm
Location: United Kingdom


Return to Flying

Who is online

Users browsing this forum: No registered users and 1 guest

cron