Main transmission ring gear set.

Service and maintenance tips, questions, and issues.

Moderator: Ron Spiker

Main transmission ring gear set.

Postby Ken_Shea » Sat Dec 29, 2012 6:45 am

Main transmission ring / sun gear set.

Any one purchased a serviceable set of these recently where I could get an idea as too cost?

Had put mine up some years back after having had them magnafluxed, well they were not put where I thought and when found there had been some water had actually dripped on the one big ring gear and now has some pitting in a few of the gears teeth. :(

Ken
Ken_Shea
 
Posts: 24
Joined: Fri Nov 02, 2012 10:13 am

Re: Main transmission ring gear set.

Postby 9121u » Sat Dec 29, 2012 8:41 am

HAY KEN i believe there is a couple of members on here that have A complete MRG gear box that would be the best rout to go i think......look at some of the old post
9121u
 
Posts: 254
Joined: Sat Mar 29, 2003 6:20 pm

Re: Main transmission ring gear set.

Postby Ken_Shea » Sat Dec 29, 2012 9:19 am

It would be the quickest for sure but this was a very low time (172 Hrs) unit purchased many years ago.
I tore it down and had all the steel components magnafluxed with all new bearings purchased.

If a set of gears can be found it would likely be much less expensive then a complete MRGB.
I'll look into that option though.

Thanks
Ken
Ken_Shea
 
Posts: 24
Joined: Fri Nov 02, 2012 10:13 am

Re: Main transmission ring gear set.

Postby fixnfly » Sat Dec 29, 2012 9:25 am

Ken , give me a call @ 570-729-7006. I can probably help you. Bill Mott
fixnfly
 
Posts: 89
Joined: Wed Feb 10, 2010 4:44 pm


Return to Servcing and Maintaining

Who is online

Users browsing this forum: No registered users and 1 guest

cron